The ThinLine II proximity reader for proximity cards, provides performance and reliability with a low-profile appearance.

Size of most standard switch plates

Dimensions 4.65"H x 2.95"W x 0.5"T (11.8 x 7.5 x 1.2cm)

Power requirements: 5 - 16 VDC

Colors Black, Gray, White, Beige

Interface Wiegand or call for clock-and-data

Potted Reader suitable for indoor or outdoor use

The new fully functional ProxPoint Plus proximity reader for proximity cards, combines multiple configuration options with an attractive, inconspicuous design and economical price.  Its potted electronics are ideal for both indoor and outdoor applications.

Small, attractive design and priced to match.

Dimensions 3.135"H x 1.70"W x 0.51"T (7.96 x 4.3 x 1.3cm).

Power requirements 5 - 16 VDC.

Colors Black, White, Gray, Beige.

Interface Wiegand or clock-and-data.

Potted Enclosure with pigtail connection for indoor or outdoor use.

EntryProx

Proximity reader for proximity cards. Created for entry level applications that will expand, or for remote locations with an existing on-line system, HID's new EntryProx reader is  compatible with all HID proximity cards or keys in any format.

• Stores up to 2000 users and 1000 time-stamped transactions.
• Compatible with all HID proximity cards and keytags.
•  Detachable antenna module can be mounted up to 10 feet away from the control unit, indoors or outdoors.
• Batch enrollment capability for 26-bit format.
• Features a 12-position keypad for  PIN entry or programming.
• Prints transactions via IR Link to optional handheld printer.
• Indicates "door ajar" and/or "forced door" conditions with alarm output relay.
• Includes "Press to Exit" (REX) push button.
Ideal for small installations
Dimensions 5.25"H x 2.75"W x 1.375"T (13.33 x 6.98 x 3.49cm)
Power requirements 10 - 15 VDC
Colors Gray
Detachable antenna can be used indoors or outdoors.

The ProxPro II is a new generation, lower-priced proximity reader for proximity cards.

Compared to the regular ProxPro (still available) it provides an additional inch (2.5 cm) of read range, requires just 5 volts for operation, and can be mounted to glass (using the optional glass mounting kit).

The ProxPro II can be mounted vertically to Asian and  European style back boxes (J-boxes) and comes with a multilingual installation manual. See the application note for more detailed comparisons.

The ProxPro II Proximity Card Reader combines  all of the electronics usually found in two separate packages into a single, architecturally attractive enclosure that mounts to a standard single-gang electric box.
Ideal for medium-range applications
Dimensions 5.0"H x 5.0"W x 1.0"T (12.7 x 12.7 x 2.54cm)
Power requirements 5-16 VDC
Colors Gray, Beige
Interface Wiegand, Serial (RS-232 or RS-422), or clock-and-data
Available with or without keypad Sealed for indoor or outdoor use. Serial output Appl. Note 

Need a desktop compatible version?
See www.rfideasstore.com/rfideas/pcprreforh i.html

The eLOCK is the answer proximity reader for using proximity cards on existing cabinets, lockers or refrigerators.

eLOCK is a stand alone, access control electronic lock with a motor-driven latch. eLOCK is simple to install on virtually any cabinet with no requirements for external wiring to power or communication networks. Its uncompromising lock control electronics include a non-volatile memory that stores 250 user / supervisor codes and audit trail.

With optional LockView™ audit trail software, the eLOCK remembers 1500 access attempts. Programming is simple; supervisors can add and delete users at the unit or they can use the optional Windows™ based LockView™ software.

www.RFIDeas.com/images/eLOCK.pdf

The MiniProx proximity reader for proximity cards, offers high reliability, consistent read range characteristics, and low power consumption in a single, easy-to-install package.

Suitable for indoor or outdoor use.

Dimensions 6.0"H x 1.7"W x 1.0"T (15.2 x 4.3 x 1.91cm)

Power requirements 5 - 16 VDC

Colors Gray, Beige Interface Wiegand or clock-and-data

Potted Reader with either terminal strip or pigtail
 

HID's MaxiProx® proximity reader for proximity cards, is ideal for installations incorporating parking control and long read range applications. The MaxiProx reader packages all the  electronics in one rugged, attractive and easy-to-install housing.

Use with the HID's ProxPass® active vehicle tag for parking control.

Features

• Long read range distance (up to 8' with ProxPass®).
• Auto tune allows read range to be maintained within four inches of metal.
• Wiegand, Clock-and-Data and selectable serial  outputs available.
• "Parking hold" feature allows connection to a loop detector to ensure accurate detection of vehicles in parking lanes.
• Compatible with all HID cards and tags with  formats up to 85 bits.
• Multicolor LED with internal or host control of the LED and beeper.
• Two MaxiProx units can operate one meter apart for "HI-LO" (truck and car) installations.
• Reader supervision signal for CASI-RUSCO panels.     

AIR ID RKE, our click-operated access control reader for Long Range Applications:

The AIR ID RKE reader works in conjunction with the click-operated RF transmitter fob. Together. they provides up to 100 feet* of read range ensuring end user convenience as well as personal security. RF IDeas uses wireless, omnidirectional RF technology that does not need to be aimed at a receiver or require direct line of site. The AIR ID RKE Fob has two buttons which can be factory programmed for individual functionality. The standard programming enables the use of one button for “IN” use and the other button for “OUT” use. Since each Smartfob reader has two distinct Wiegand outputs, only one receiver is required for IN/OUT applications where both entrances/exits are in close proximity to one another.
 

Optionally you can add HID, Indala, or Casi passive tags to the AIR ID RKE Fob for compatibility with existing door readers.
Please click here to view the AIR ID RKE Data Sheet for more details.

Choose 315 or 418 Mhz model.