Specifications
Mounting: Single-gang style electrical box
Dimensions: 3.3” W x 4.8” H x 1.5” D (83.8 mm x 121.9 mm x 36.3 mm)
Weight: 6.8 oz (.195 kg)
Style: Attractive UL94 polycarbonate enclosure protects components from damage and all connections are fully identified by silk-screened nomenclature.
Card Data Formats: Supports any card data format up to 128 bits
Hardware: 32-bit RISC CPU, 100 MHz processor
Memory: 8 MB onboard Flash memory 32 MB SDRAM 256K SRAM
Visual Indicators: Two LEDs indicate power/network activity and device I/O activity.
Power Supply Requirements:
1 A @ 12-16 VDC maximum
Recommended: Power is supplied using the Power over Ethernet technology available with PoE (802.3af ) enabled network devices.
Alternate: Supervised linear power supply with battery backup, input surge protection, and AC Fail and battery low contact outputs.
Relays can be configured to supply power as follows:
Available Power: The ES400 is capable of supplying a total of 700 mA to field devices. This power may be shared between a reader and one or two additional field devices. Unpowered, relay contacts are rated for 2 A @ 30 VDC
Note: Use of a Listed Access Control / Burglary power-limited power supply is required for all Listed installations.
The ES400 is intended for use in indoor environments that comply with the following specifications:
Operating Temperature: 32° to 122° F (0° to 50° C)
Operating Humidity: 5% to 95% relative, non-condensing
Communication Ports: Ethernet – 10 or 100 Mbps Reader - Wiegand, HID Clock-and-Data
Certifications: UL 294 Listed Component for the US, CSA 205 for Canada, FCC Class A Verification, ICES-003 Class A Canada, EU (CE Marking), Australia (C-Tick Mark), New Zealand
